|Place of Origin:||HUNAN|
|Minimum Order Quantity:||Negotiation|
|Packaging Details:||340*220*95 MM|
|Payment Terms:||L/C, D/A, T/T, D/P, Western Union, MoneyGram|
|Colour:||Black||Core Number:||24 Core|
|Into Cable Size:||7.0~12.5mm||Out Cable Size:||2.0 4.2 4.6 4.8 Mm|
|Cable Ports (inlet/outlet):||2 Into 24 Out|
fiber optic joint box,
ftth fiber optic terminal box
24 Core Fiber Optic Black Distribution Box Gray PC ABS Wall Hanging and Pole Installation FIBER OPTIC TERMINATION BOX
KXT-A-24B fiber access termination closure is able to hold up to 16subscribers and 96splicing points as closure. it is used as a splicing closure and a termination point for the feeder cable to connect with drop cable in FTTX network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box.
1. Water-proof design with IP-65 Protection level.
2. Integrated with splice cassette and cable management rods.
3. Manage fibers in a reasonable fiber radius condition.
4. Easy to maintain and extend the capacity.
5. Fiber bend radius control more than 40mm.
6. Suitable for the fusion splice or mechanical splice.
7. 1*16 Splitter can be installed as an option.
8. Efficient cable management.
9. 24 ports cable entrance for drop cable
·Wall mounting and pole mounting installation
·FTTH pre-installation and filed installation
·2*3mm indoor FTTH drop cable and outdoor figure-8FTTH self-supporting drop cable
Splice cassette and cable management tool, installation nuts and bolts, protection sleeves hose clamp, cable tube, wrench, cover, holder, rubber seal for cable entrance.
|Out Cable diameter(mm)||0.9 , 2.0 , 3.0 , 4.2 , 4.8|
|Max capacity of splice||96|
1, Environmental requirement
2, Main technical datasheet
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:＞1000 times
3, Thunder-proof technical datasheet
The grounding device is isolated with the cabinet, isolation resistance is less than 2×104 MΩ/500V(DC)；
The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover；U≥3000V
Table 1 Model and configuration
|Material||Size||Max Capacity||Installation size||Wight||Color|
Drill 4 holes over the wall based on the size in table 1,place the expansion bolt Φ7.5*40,place the box to match up the holes and use bolt to fasten.
Fix 1 set of the easy pole ring to the telecom pole .
1. Users' Manual*1.
3. Accessories Bag * 1
Packing, transportation and storage
This equipment packaging is moisture-proof and earthquake-proof. The accessories are packed first plastic
bags, then into the boxes with plastic bags for sealing. There are moisture-proof and earthquake direction signs
outside the boxes.
It can’t be inverted in the transport and be free from rolling when carrying. Please load carefully and
prevent the collision. You should prevent it from heavy rain before installation. The temperature in the
transport should be controlled between-35℃ to +55℃.
The excessive accumulation of goods should be stored on the cartons. The treasury should away from the
erosion of corrosive gas equipment and the temperature should be below 45℃ and higher than -5℃, and
relative temperature should not be high in long-term(generally less than 75%).
Contact Person: sales