Overhead Electric Power ADSS Armored Fiber Optic Cable No Armoured Track Resistant Outer Sheath
|Place of Origin:||SHENZHEN|
|Model Number:||ADSS 48B1.3|
Payment & Shipping Terms:
|Minimum Order Quantity:||20KM|
|Packaging Details:||1.1*0.72*1.1m 2km~4km ,Length per roll , Wooden Drum|
|Payment Terms:||T/T, L/C, D/A, D/P, Western Union, MoneyGram|
|Fiber Type:||G652D/G657A1||Fiber Brand:||Corning/YOFC/FIBERHOME|
|Length Per Roll:||2km To 4km||Application:||Outdoor Aerial Application|
|Type Of Optical Cable:||Power Optical Cable||Sheath Color:||Black|
|Fiber Count:||48 Core||Package:||Wooden Drum|
|Sheath:||Track-resistant Outer Sheath||Span:||150 Meters|
armored fiber cable,
armoured fiber cable
Overhead Electric Power ADSS Fiber Optic No Armoured Cable Track-resistant Outer Sheath High voltage HDPE 110KV
ADSS cable, Loose tube construction, tubes jelly filled, tubes with filler rods lay up around non-metallic FRP (Fiber-glass Reinforced Plastic) central strength member, water-blocking material, aramid yarns reinforced and HDPE outer sheath.
ADSS cable is up to 144 optical fibres in jelly-filled loose tubes, laid up around a central non-metallic strength member. The cable is water blocked, aramid yarn reinforced and polyethylene sheathed. Surface printing for the cable includes sequential length marking at one-metre intervals. Mainly installed at existing 220kV or lower voltage power lines . Two Jacket and stranded loose tube design.
Two important materials: 1. It is Track-resistant HDPE; 2. Imported aramid.
1. 48 SM-fibers
2. G652 D operating wavelength at 1260~1625nm.
3. FRP as central strength member.
4. Loose buffer tubes SZ-stranded.
5. The buffered tube filled with filling compound while the stranded core covered with water block material
6. Aramid yarns as peripheral strength member
7. Track-resistant HDPE(PE outer sheath is applied for the application in which cable is installed at the place where the spatial potential ≤12KV)
8. Suitable as: Aerial installation (Span:150m)
IEC 60793-1, 60793-2, 60794-1
ITU-T G650, G652
Fiber color coding
Tube color coding
Cable structure and parameter
|Max. fiber counts per tube||12|
|Central strength member||Material||FRP|
|Peripheral strength member||Material||Aramid yarns|
|Thickness(mm)||Nominal 1.7, Min. 1.5|
|Cable diameter (mm) ( ±0.5)||10.1|
|Cable weight (kg/km) (±10%)||83|
Mechanical Performance of Cable
|Rated tensile strength (RTS)||N||5400|
|Crush strength (Short/ Long term)||N/100mm||1000/300|
Characteristic of Optical Fiber
|Mode field diameter (1310nm):||9.2mm±0.4mm|
|Mode field diameter (1550nm):||10.4mm±0.8mm|
|Core/cladding concentricity error:||＜12mm|
|Refractive index profile:||1310nm||1.4672|
|Cut off wavelength of cabled fiber (lCC):||＜1260nm|
|Attenuation at 1310nm:||＜0.36dB/km|
|Attenuation at 1383±3nm:||＜0.36dB/km|
|Attenuation at 1550nm:||＜0.22dB/km|
|The loss increase of 100 turns of fiber loosely wound|
|with 25mm radius:||＜0.05dB|
|Dispersion in the range 1288 to 1339nm:||＜3.5ps/ (nm•km)|
|Dispersion at 1550nm:||＜18ps/ (nm•km)|
|Dispersion slope at zero dispersion wavelength:||＜0.092ps/(nm2•km)|
|Polarization mode dispersion link value:||＜0.1ps/Ökm|
The core of the optical fiber, with a higher refractive index compared to the cladding, is made of SiO2 (Silicon dioxide) doped with GeO2 (Germanium dioxide).
The cladding of the optical fiber is made of SiO2 (Silicon dioxide).
Type of primary coating
The primary coating is made of an UV-curable acryl ate.
Characteristic of Optical Cable
|Mechanical characteristic and test method|
|Tensile strength||MAT, conform to IEC 60794-1-21-E1 while fiber strain is ≤0.33%|
|Crush||1000N,conform to IEC 60794-1-21-E3|
|Impact||Conform to IEC 60794-1-21-E4|
|Repeated bending||Conform to IEC 60794-1-21-E6|
|Torsion||Conform to IEC 60794-1-21-E7|
|Abrasion||Conform to IEC 60794-1-21-E2B|
|Cable bend||Conform to IEC 60794-1-21-E11|
|Water penetration||Conform to IEC 60794-1-F5B|
|Compound flow||Conform to IEC 60794-1-21c-E14|
||Operation||- 40℃ ~ +60℃|
|Installation||- 15℃ ~ +50℃|
|Storage/transportation||- 40℃ ~ +60℃|
|Temperature cycling test||Conform to IEC 60794-1-22-F1|
|Bending Radius||Unloaded||10 times of outer diameter|
|Loaded||20 times of outer diameter|
The product is accord with the instruction of EU ROHS
Packing and Logo
1.1 Each single length of cable shall be wound on an Iron stand-wooden composite drum.
1.2 Covered by plastic buffer sheet.
1.3 Sealed by strong wooden battens.
1.4 Drum length
1.4.1 Standard drum length is 4000m;
1.4.2 Total quantity is at least the ordered quantity.
1.4.3 Or it can be delivered according to customers’ requirements, but not longer than 5000m.
2. Drum Marking
- Manufacturer name;
- Manufacturing year and month;
- Roll-direction arrow;
- Cable outer end position indicating arrow;
- Cable type and size;
- Drum number;
- Drum length;
- Gross / net weight;
- Caution plate indicating the correct method for loading, unloading and convey the cable;
- Other customer information such as contract no., project no., and delivery destination. (if needed)
3 Cable identification documents
- Product qualified certificate;
Package and Shipping:
A. All of our fiber optic cable package are with export wooden drum.
B. 2~3km/drum, Outdoor fiber optic cable's wooden dimension is 110cm*110cm*71cm, 0.85CBM,
C. Can be load about 39 drums for a 20GP.
Also accept custom cable drum from customers. welcome to contact us!