• Optical Fiber Curing Oven Fiber Cable Tools Power 750W Crimping Machine 220V 50Hz
  • Optical Fiber Curing Oven Fiber Cable Tools Power 750W Crimping Machine 220V 50Hz
  • Optical Fiber Curing Oven Fiber Cable Tools Power 750W Crimping Machine 220V 50Hz
  • Optical Fiber Curing Oven Fiber Cable Tools Power 750W Crimping Machine 220V 50Hz
Optical Fiber Curing Oven Fiber Cable Tools Power 750W Crimping Machine 220V 50Hz

Optical Fiber Curing Oven Fiber Cable Tools Power 750W Crimping Machine 220V 50Hz

Product Details:

Place of Origin: SHENZHEN
Brand Name: KEXINT
Certification: CE UL ISO-9001
Model Number: KXT-GHL01

Payment & Shipping Terms:

Minimum Order Quantity: 1
Price: 722.42
Packaging Details: 550mm(L)×180mm(H)×350mm(W)
Delivery Time: 5
Payment Terms: D/A, D/P, T/T, Western Union, MoneyGram, L/C
Supply Ability: 10+PCS+Day
Get Best Price Contact Now

Detail Information

Name: Crimping Machine Voltage: 220V±10% 50Hz
Physical Dimension: 550mm(L)×180mm(H)×350mm(W) Weight: 26Kg
Power: 750W(D 400W) Ambient Temperature: 10℃~40℃
Relative Humidity: 15~85% Heating Tools: φ3.0、φ2.0、φ0.9 、ST And φ1.25/ 2.0 Type
High Light:

fiber cable tools

,

fiber network tools

Product Description

Optical Fiber Curing Oven Fiber Cable Tools Power 750W Crimping Machine 220V 50Hz

Optical Fiber Curing Oven Fiber Optic Tools Power 750W Heating tools φ3.0,φ2.0,φ0.9

 

      This equipment employs two sets of independent precise heating control systems to respectively control two heating boards which are able to simultaneously cure 24 ferrules (standard dimension is φ 2.5mm). This equipment features high production efficiency, stable and reliable quality. (Note: D employs one set of precise heating control system and one heating board.) Different types of products can be cured using different heating tools.

 

Name and function of each part

1. Heating tool

It is a dismountable fixture, which is used to install the ferrule to be cured, and

is inserted into heating board to heat ferrule to be cured.

2. Heating board

It is securely mounted on panel, and internal heating device is used to generate heating and cure ferrule.

3Fuse

Type of fuse is 2A/220V

4Temperature controller

It is used to control heating temperature of heating board, and temperature can be adjusted within 60℃~150℃ (it is prohibited to make temperature over 150℃, otherwise the equipment will be damaged).

5Power switch

It is used to turn on or off the power.

6Timing switch

Press this switch to start up time relay, and press twice continuously this switch to stop timer.

7Time relay

Adjusting parameters of time relay can shorten or prolong heating and curing time (now relay is working).

8Heating-on indicator

When this indicator is on, the equipment is in heating status.

9Heating-off indicator

When this indicator is on, the equipment stops heating

 

 Chapter 3 Operation

3.1 Check before startup

1.Check whether component of equipment is complete

2.Check whether screws and buttons on panel are loose or missing

3.Check whether power line is properly connected

3.2 Setting of heating temperature and time

3.2.1 Setting of heating time

1. Remove the enclosure of temperature controller and time relay on panel

2. Adjust digital parameters to set required temperature and time.

3. Install the enclosure.

3.2.2 Setting of heating temperature

1. Press MODE button, the red number on panel representing temperature

changes into as shown in left, and now change the green number under red

number to set temperature.

 

Chapter 4 Common failures and causes

The following are some failures occurring to curing oven and remedies. Please duly

contact us for the failures which occur in your equipment and are not shown in the

following.

Common failures and causes:

Failure Cause Remedy

Power indicator is not on

after startup

Power plug is not properly

connected

No electricity

Properly connect the

plug

Fuse damaged Replace fuse

Press timing-on button,

timer is not on

Timer is set to zero Reset timer
Timer does not work

Replace with a new

timer

Ferrule can not be cured Set temperature is too low

Reset temperature

controller

Set time is too short Prolong curing time

Heating board can not

generate heating

Temperature is set to zero

Adjust temperature

controller

 

Optical Fiber Curing Oven Fiber Cable Tools Power 750W Crimping Machine 220V 50Hz 0

Chapter 5 Annex

5.1 Main parameters of equipment

Voltage 220V±10% 50Hz

Power 750W(D 400W)

Overall dimension 550mm(L)×180mm(H)×350mm(W)

Ambient temperature 10℃~40℃

Relative humidity 15~85%

5.2 Optional parts of equipment

Heating tools: φ3.0,φ2.0,φ0.9 ,ST and φ1.25/ 2.0 type; Custom heating tool is

also optional on client’s request.

 

 

 

 

Want to Know more details about this product
I am interested in Optical Fiber Curing Oven Fiber Cable Tools Power 750W Crimping Machine 220V 50Hz could you send me more details such as type, size, quantity, material, etc.
Thanks!
Waiting for your reply.