1 ~ 24 core Single Mode Armored Fiber Optic Cable Computer Room 0.9 Tube SOS Indoor Indoor
Specifically for field wiring and complexity of environment, designed for repeated retractable conditions application, light weight, anti-tension, compression and strong; softness; easy to bend; abrasion, flame retardant, suit for widely range temperature. Communication systems for military field wiring or repeated rapid retractable; radar, aviation and ship wiring; oilfield, mine, port, broadcast live on television, communication line repair, and other harsh conditions of the occasion
a. Wiring compact all-dielectric structure, the inner sleeve is 0.9mm fiber, the cable has a high strength-weight ratio, allowing for quick wiring;
b. High-strength fiber composite structure secondary coating offers the best performance and minimum temperature of the additional attenuation cables in harsh conditions to ensure the reliability and service life;
c. Large area of aramid reinforced fiber optic cable to provide a high mechanical strength;
d. A special high-strength, flexible type central reinforcing element, to ensure fiber strength and bending properties;
e. Small tight pitch SZ stranded helical twisted fibers and aramid fibers single combined to ensure the field fiber optic cable has greater tensile strain capacity;
f. Environmental friendly, Comply with RoHS.
2.Coal, oil, natural gas, etc.
3.Geological exploration Communications;
5.Emergency reopened optical fiber communication.
|Cable weight||15kg/km approx|
|Tensile strength||Short term||200N|
|Compression resistant strength||≥3000N/100MM|
|Minimal Bending radius||≥30D||≥30D|
a Nominal shipping length of the cable will be 1~3 km. Other length is also available if required by buyer.
b Each length of the cable will be wound on a separate strong wooden.
c Both ends of the cable will be sealed with a suitable heat shrinkable cap to prevent the entry of moisture during transportation and storage.
d The cable end will be securely fastened to the drum to prevent the cable from coming loose during transit or becoming loose during placing operations.
e Circumference battens will be secured between the outer edges of the flange to protect the cable against damage during shipment and storage.
f For testing purposes, the inner end of the cable will be recessed into a slot in the drum flange . A minimum length of one meter of cable at the inner end will be accessible.
g The cable will be shipped on drums designed to prevent damage to the cable during shipment and installation
h The minimum barrel diameter of the drum will be 30 times to the overall cable diameter.
|Contact Person :||Miss. masha|