Outdoor GYXTC8S 12G652D Fiber Optic Armoured Cable OS2 Self Supporting Erial Installation 8 Structure
|Place of Origin:||SHENZHEN|
Payment & Shipping Terms:
|Minimum Order Quantity:||10km|
|Packaging Details:||0.82*0.73*0.82m 2km~4km ,Length per roll, Wooden Drum|
|Payment Terms:||T/T, L/C, D/A, D/P, Western Union, MoneyGram|
|Outer Jacket:||PE Or HDPE||Fiber Count:||2~12|
|Fiber Type:||G652D/G657A1/G657A2/OM1/OM2||Fiber Brand:||Corning/YOFC/FIBERHOME|
|Messenger:||8.0*5.0mm Or 7.0*5.0mm||Length Per Roll:||2km To 4km|
|Instructions:||Outdoor Aerial Self-supporting||Armoured:||Wrinkled Steel Strip|
armored fiber cable,
armoured fiber cable
Outdoor GYXTC8S 12G652D Fiber Optic Armoured Cable OS2 Self-supporting Erial Installation 8 Structure
The 250um fiber is positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. After an Aluminum Polyethylene Laminate (APL) moisture battier is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene (PE) sheath to be figure 8 structure.
Our figure 8 fiber optic cable GYXTC8S GYXTC8A GYTC8S GYTC8A GYTC8Y are also available on request. This type cable is specifically applied for self-supporting aerial installation.
High tensile strength of stranded wires meet the requirement of self-supporting and reduce the installation cast
Good mechanical and temperature performance
High strength loose tube that is hydrolysis resistant
Special tube filling compound ensure a critical protection of fiber
The following measures are taken to ensure the cable watertight:
Steel wire used as the central strength member
Loose tube filling compound
100% cable core filling
APL moisture barrier
Storage / Operating Temperature: -40℃~+70℃
Usable in Self-supporting
|Colored Coating Fiber||Dimension||250µm±15µm|
|Color||Blue, Orange, Green, Brown, Gray, White|
|Loose Tube||Dimension||1.8 mm±0.05mm|
|Steel Strength Member||Diameter||1.0mm x7|
|Outer Jacket||Dimension||Upper 5.0mm±0.1mm, lower part 8.0mm±0.1mm|
Mechanical and Environmental Characteristics
|Min. Bend Radius(Dynamic)||mm||20D|
|Min. Bend Radius(Static)||mm||10D|
|Cable Cute-off Wavelength (nm)||≤1260||≤1450|
Mechanical requirements and methods of fiber cable
|Tensile strength||2850N, conform to IEC 794-1-E1 while fiber strain is ≤0.33%|
|Crush||2200N/100mm, conform to IEC 794-1-E3|
|Impact||conform to IEC 794-1-E4|
|Repeated bending||conform to IEC 794-1-E6|
|Temperature cycling test||conform to IEC 794-1-F1|
Fiber color coding
Each fiber will be identifiable throughout the length of the cable in accordance with the following color sequence. Fiber color in each tube starts from No. 1 Blue.
|Fiber color code||1||2||3||4||5||6|
Package and Shipping:
1. All of our fiber optic cable package are with export wooden drum.
2. 2~3km/drum, Outdoor fiber optic cable's wooden dimension is 110cm*110cm*71cm, 0.85CBM,
3. Can be load about 39 drums for a 20GP.
Also accept custom cable drum from customers. welcome to contact us!