Optical Fiber Cold Junction Fiber Optic Fast Connector 1260~1620nm Wavelength

 

     The optical fiber cold connector is used in emergency time, when the communication line is interrupted, the fiber at the customer end is welded, no welding machine is needed, only the fiber cold connector is needed, and it is used without the welding machine. The optical fiber cold connector is equivalent to a connector for the fiber optic docking fiber or the fiber butt fiber pigtail. (The fiber docking pigtail refers to the fiber core and the fiber pigtail core but not the former tail fiber head). The continuation is called a fiber optic connector. The cold joint is used when the two pigtails are docked. The main component inside is a precision V-shaped groove. After the two pigtails are plucked, the cold joints are used to realize the docking of the two pigtails. He is simpler and faster to operate, saving time compared to welding with a fusion splicer. Fiber optic quick connector and fiber optic cold connector will play an irreplaceable role in FTTH access. Fiber optic quick connector field termination technology just solves this problem, without the need for welding operation, fast and low cost, realizing anytime, anywhere access .

    The optical fiber cold junctionFTTHAccess to play an irreplaceable role in the field of fiber optic connector technology to solve this problem just to solve this problem, no need to weld the operation convenient and fast, low cost, and truly achieve anytime, anywhere access.

 

Product technical :

1. Scope of application 0.25 mm & 0.90 mmOptical fiber
2. Fiber diameter 125 mu m (657B & 657A)
3. Compact diameter 250 m & 900 m
4. Applicable model single mode&multimode
5. Operation time about10s(without optical fiber processing)
6. Insertion loss Less than 0 10dB(1310nm & 1550nm)
7. Return loss Less than -40dB
8. Bare fiber tightening force >5 N
9. Tight wrapping force >8 N
10. Use temperature -40~+75C
11. Repeated use10Times) DeltaIL = 0.2dBDeltaRL = 5dB